Docker-Compose启用IPv6
- 你如果没用使用Docker-Compose，就忽略配置，以了解为主，直接去看下面的docker配置。
- docker-compose.yaml 文件必须使用
version: “2.*”，version: “3.*”不支持enable_ipv6配置 - 如果已有旧的容器在运行（网络配置发生了变化），则需要先销毁容器
docker-compose down然后再重新创建docker-compose up - 仅需在network下添加如下内容即可，其他信息正常配置。
- docker-compose.yaml 文件必须使用
networks:
local_bridge:
enable_ipv6: true
driver: bridge
ipam:
config:
- subnet: "2409:807e::/80"
启用ipv6
- 说明
docker默认是不支持ipv6的，所以想要使用ipv6，就得单独开启这个功能。 - 前提条件
主机需要具备ipv6地址并能正常使用，如下，2409开头的正规v6地址，而非fe80这种内部用的v6地址哈。
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether fa:16:3e:67:77:58 brd ff:ff:ff:ff:ff:ff
inet 10.241.102.245/24 brd 10.241.102.255 scope global dynamic noprefixroute ens3
valid_lft 63404sec preferred_lft 63404sec
inet6 2409:807e:58cc:114::a2d/120 scope global noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::f816:3eff:fe67:7758/64 scope link noprefixroute
valid_lft forever preferred_lft forever
- 执行
vim /etc/docker/daemon.json配置文件【没有这个配置文件是正常的】，写入如下内容"fixed-cidr-v6": "2409::/80",这个后面的ip是自定义的。
[root@xz-docker-tes-01 ~]# cat /etc/docker/daemon.json
{
"ipv6": true,
"fixed-cidr-v6": "2409::/80",
"experimental": true,
"ip6tables": true
}
[root@xz-docker-tes-01 ~]#
重启docker生效
- 重启不报错，实际上此时docker就能支持ipv6了。
[root@xz-docker-tes-01 ~]# systemctl restart docker
[root@xz-docker-tes-01 ~]# systemctl status docker
● docker.service - Docker Application Container Engine
Loaded: loaded (/usr/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2023-12-01 11:40:31 CST; 9s ago
Docs: https://docs.docker.com
Main PID: 14470 (dockerd)
Tasks: 13
Memory: 47.3M
CGroup: /system.slice/docker.service
└─14470 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
创建一个ipv6的docker网络
- 这一步其实是不需要做的，因为，不使用这个网络的docker容器，也可以正常使用ipv6地址。我这多做一步是为了做测试而已。具体区别见下面测试说明。【测试后，我觉得这个没意义】
[root@xz-docker-tes-01 ~]# docker network create -d bridge --ipv6 --subnet "2409:807e::/80" ipv6_bridge 09663034b21493f64d2484dc21923a789bc8ac51c403d422e397435df74f204b [root@xz-docker-tes-01 ~]#
- 创建好后的网络信息如下
[root@xz-docker-tes-01 ~]# docker network list NETWORK ID NAME DRIVER SCOPE bf1937081949 bridge bridge local e98be3082c27 host host local 09663034b214 ipv6_bridge bridge local 7cee98cd58fe none null local [root@xz-docker-tes-01 ~]#
创建容器测试v6地址
使用ipv6的网络创建容器
我这使用上面创建的一个ipv6的网络做测试测试
[root@xz-docker-tes-01 ~]# docker run -dit --name=v6 --restart=always --network=ipv6_bridge hub.c.163.com/library/centos:latest 49af16d7dd9c63afd2a43b24b6dfdb8b39d70ef8e39c1d1c067dcbe28c242efa [root@xz-docker-tes-01 ~]# [root@xz-docker-tes-01 ~]# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 49af16d7dd9c hub.c.163.com/library/centos:latest "/bin/bash" 3 seconds ago Up 2 seconds v6 [root@xz-docker-tes-01 ~]#
容器内 ping其他v6地址和网关都能通，一切正常
[root@xz-docker-tes-01 ~]# docker exec -it v6 bash [root@49af16d7dd9c /]# ls anaconda-post.log bin dev etc home lib lib64 lost+found media mnt opt proc root run sbin srv sys tmp usr var [root@49af16d7dd9c /]# [root@49af16d7dd9c /]# ping6 2409:807e:58cc:114::a2d PING 2409:807e:58cc:114::a2d(2409:807e:58cc:114::a2d) 56 data bytes 64 bytes from 2409:807e:58cc:114::a2d: icmp_seq=1 ttl=64 time=0.459 ms 64 bytes from 2409:807e:58cc:114::a2d: icmp_seq=2 ttl=64 time=0.093 ms 64 bytes from 2409:807e:58cc:114::a2d: icmp_seq=3 ttl=64 time=0.090 ms ^C --- 2409:807e:58cc:114::a2d ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2058ms rtt min/avg/max/mdev = 0.090/0.214/0.459/0.173 ms [root@49af16d7dd9c /]# ping6 2409:807e:58cc:114::a01 PING 2409:807e:58cc:114::a01(2409:807e:58cc:114::a01) 56 data bytes 64 bytes from 2409:807e:58cc:114::a01: icmp_seq=1 ttl=63 time=10.2 ms 64 bytes from 2409:807e:58cc:114::a01: icmp_seq=2 ttl=63 time=2.04 ms 64 bytes from 2409:807e:58cc:114::a01: icmp_seq=3 ttl=63 time=2.23 ms 64 bytes from 2409:807e:58cc:114::a01: icmp_seq=4 ttl=63 time=2.35 ms ^C --- 2409:807e:58cc:114::a01 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 2.048/4.208/10.200/3.461 ms [root@49af16d7dd9c /]# [root@49af16d7dd9c /]# exit exit [root@xz-docker-tes-01 ~]#
该容器的网络容器里面呢，也会有一个ipv6地址，主机虽然能ping通，但这个ip是容器专属的，
[root@xz-docker-tes-01 ~]# docker inspect v6 | grep "IPv6"
"LinkLocalIPv6Address": "",
"LinkLocalIPv6PrefixLen": 0,
"SecondaryIPv6Addresses": null,
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"IPv6Gateway": "",
"IPv6Gateway": "2409:807e::1",
"GlobalIPv6Address": "2409:807e::2",
"GlobalIPv6PrefixLen": 80,
[root@xz-docker-tes-01 ~]#
[root@xz-docker-tes-01 ~]# ping 2409:807e::2
PING 2409:807e::2(2409:807e::2) 56 data bytes
64 bytes from 2409:807e::2: icmp_seq=1 ttl=64 time=0.695 ms
64 bytes from 2409:807e::2: icmp_seq=2 ttl=64 time=0.090 ms
^C
--- 2409:807e::2 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 50ms
rtt min/avg/max/mdev = 0.090/0.392/0.695/0.303 ms
[root@xz-docker-tes-01 ~]#
容器内能ping通同样用这个网络创建的其他容器【但默认容器直接网络是隔离的哈】，具体这个v6地址的用途自行探索吧。
[root@xz-docker-tes-01 ~]# docker exec -it v6 bash [root@49af16d7dd9c /]# ping6 2409:807e::3 PING 2409:807e::3(2409:807e::3) 56 data bytes 64 bytes from 2409:807e::3: icmp_seq=1 ttl=64 time=0.346 ms 64 bytes from 2409:807e::3: icmp_seq=2 ttl=64 time=0.108 ms 64 bytes from 2409:807e::3: icmp_seq=3 ttl=64 time=0.107 ms ^C --- 2409:807e::3 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2085ms rtt min/avg/max/mdev = 0.107/0.187/0.346/0.112 ms [root@49af16d7dd9c /]#
使用普通网络创建容器测试
进入以后，能ping通网关和其他v6地址，没问题。
[root@xz-docker-tes-01 ~]# docker run --name=test1 -it hub.c.163.com/library/centos [root@d866a511db84 /]# ping6 2409:807e:58cc:114::a17 PING 2409:807e:58cc:114::a17(2409:807e:58cc:114::a17) 56 data bytes 64 bytes from 2409:807e:58cc:114::a17: icmp_seq=1 ttl=63 time=1.85 ms 64 bytes from 2409:807e:58cc:114::a17: icmp_seq=2 ttl=63 time=0.782 ms 64 bytes from 2409:807e:58cc:114::a17: icmp_seq=3 ttl=63 time=0.793 ms 64 bytes from 2409:807e:58cc:114::a17: icmp_seq=4 ttl=63 time=0.891 ms ^C --- 2409:807e:58cc:114::a17 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3053ms rtt min/avg/max/mdev = 0.782/1.080/1.855/0.449 ms [root@d866a511db84 /]# [root@d866a511db84 /]# ping6 2409:807e:58cc:114::a01 PING 2409:807e:58cc:114::a01(2409:807e:58cc:114::a01) 56 data bytes 64 bytes from 2409:807e:58cc:114::a01: icmp_seq=1 ttl=63 time=13.3 ms 64 bytes from 2409:807e:58cc:114::a01: icmp_seq=2 ttl=63 time=1.85 ms ^C --- 2409:807e:58cc:114::a01 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2003ms rtt min/avg/max/mdev = 1.716/5.648/13.378/5.466 ms [root@d866a511db84 /]#
默认生成的，没有这个v6地址的，但不影响使用ipv6.
[root@xz-docker-tes-01 ~]# docker inspect test1 | grep "IP"
"LinkLocalIPv6Address": "",
"LinkLocalIPv6PrefixLen": 0,
"SecondaryIPAddresses": null,
"SecondaryIPv6Addresses": null,
"GlobalIPv6Address": "2409::242:ac11:2",
"GlobalIPv6PrefixLen": 80,
"IPAddress": "172.17.0.2",
"IPPrefixLen": 16,
"IPv6Gateway": "2409::1",
"IPAMConfig": null,
"IPAddress": "172.17.0.2",
"IPPrefixLen": 16,
"IPv6Gateway": "2409::1",
"GlobalIPv6Address": "2409::242:ac11:2",
"GlobalIPv6PrefixLen": 80,
[root@xz-docker-tes-01 ~]#
创建一个nginx容器用ipv6地址访问测试
容器创建
先创建一个映射端口的nginx容器
[root@xz-docker-tes-01 ~]# docker run -dit --name=nginx --restart=always -p 80:80 --network=ipv6_bridge nginx 4a175fb0754961537b23111bab1251e9c9f36645e9936f07c5daeea28af4d898 [root@xz-docker-tes-01 ~]# netstat -ntlp | grep 80 tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 16074/docker-proxy tcp6 0 0 :::80 :::* LISTEN 16088/docker-proxy [root@xz-docker-tes-01 ~]#
我是指定了创建的ipv6网络的【其实不指定也一样，不影响外部访问的】
[root@xz-docker-tes-01 ~]# docker inspect nginx | grep "IPv6"
"LinkLocalIPv6Address": "",
"LinkLocalIPv6PrefixLen": 0,
"SecondaryIPv6Addresses": null,
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"IPv6Gateway": "",
"IPv6Gateway": "2409:807e::1",
"GlobalIPv6Address": "2409:807e::3",
"GlobalIPv6PrefixLen": 80,
[root@xz-docker-tes-01 ~]#
ipv4地址验证
直接浏览器输入ipv4的地址，不报错就行【我下面显示ccx是因为我修改过nginx的默认文件内容了】
ipv6地址访问验证
验证ipv6地址之前，需要保证你测试的主机上已经配置有ipv6地址并且能正常使用
首先测试能否ping通目标ipv6地址【就上面搭建ipv6的主机v6地址，是主机，而非容器的啊】
然后网页直接输入v6地址【就上面搭建ipv6的主机v6地址，是主机，而非容器的啊】
- 访问格式
[ipv6addr]【注意，v6地址用中括号扩起来的】 - 其实下面内容就是nginx默认的内容，因为没有放任何东西，所以就会显示nginx界面，反正没报错就是正常的。
修改nginx容器网页内容
先进入nginx容器内部
[root@xz-docker-tes-01 ~]# docker exec -it nginx bash root@4a175fb07549:/#
因为不知道容器的http默认文件在哪里，所以可以用find搜索
root@4a175fb07549:/# find / -name html find: '/proc/32/map_files': Permission denied find: '/proc/33/map_files': Permission denied find: '/proc/34/map_files': Permission denied find: '/proc/35/map_files': Permission denied /usr/share/nginx/html root@4a175fb07549:/#
通过搜索已知html路径为：/usr/share/nginx/html
那么就可以去修改了噻【懂了吧，想要显示啥内容，替换这个index.html文件就行了】
root@4a175fb07549:/usr/share/nginx/html# ls
50x.html index.html
root@4a175fb07549:/usr/share/nginx/html# vi index.html
bash: vi: command not found
root@4a175fb07549:/usr/share/nginx/html# vim index.html
bash: vim: command not found
root@4a175fb07549:/usr/share/nginx/html# cat index.html
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
body {
width: 35em;
margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif;
}
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>
<p>For online documentation and support please refer to
<a href="http://nginx.org/" rel="external nofollow" >nginx.org</a>.
Commercial support is available at
<a href="http://nginx.com/" rel="external nofollow" >nginx.com</a>.</p>
<p><em>Thank you for using nginx.</em></p>
</body>
</html>
root@4a175fb07549:/usr/share/nginx/html# cp index.html index.html.bak
root@4a175fb07549:/usr/share/nginx/html# echo ccx > index.html
root@4a175fb07549:/usr/share/nginx/html#
如我上面，将ccx内容写入了index.html文件，那么正常情况，网页就只会显示ccx这3个字母
以上就是docker容器启用ipv6地址的方法流程的详细内容，更多关于docker启用ipv6地址的资料请关注其它相关文章！
